Free online 3D to 2D converter
STL to SVG Converter
Create a 2D SVG section drawing from an STL 3D model. Choose a top, front or side cutting plane, adjust its position, preview the contours and download an SVG file without uploading your model.
Browser-based 3D mesh section tool
STL to SVG workspace
Slice an STL mesh at a chosen position and export its 2D section contours as a scalable SVG drawing.
Section direction
Horizontal cut along the Z axis
2D section preview
Your section drawing will appear here
Upload an STL or load the sample model to begin.
STL files are parsed and sectioned locally in this browser. Your model is not uploaded to a conversion server.
How to convert STL to SVG
- Choose a binary or ASCII STL file, or load the sample model to test the converter.
- Select a top (XY), front (XZ) or side (YZ) section direction.
- Move the section-position slider to choose where the plane intersects the 3D mesh.
- Choose the coordinate units used by the STL model. STL files do not reliably store this information.
- Review the 2D contours and download the SVG file.
What is an STL section drawing?
An STL file stores a 3D surface as a collection of triangles. A section drawing is created by intersecting that triangular mesh with a plane. The intersection segments are connected into 2D contours and written as SVG paths. The result represents the selected cross-section, not the complete 3D model.
Top, front and side section directions
- Top (XY): creates a horizontal section at a selected height along the Z axis.
- Front (XZ): creates a vertical section at a selected depth along the Y axis.
- Side (YZ): creates a vertical section at a selected position along the X axis.
Why does the STL unit setting matter?
STL geometry stores coordinate values but does not reliably identify whether those values represent millimetres or inches. Select the coordinate unit used by your source model. The exported SVG uses physical width and height in millimetres.
Will every STL produce closed SVG contours?
No. Open surfaces, non-manifold edges, missing triangles and damaged meshes can create open section paths. The tool reports open and closed contour counts where it can identify them. Check the SVG in your CAD, vector or manufacturing software before using it as a cutting or machining path.
STL to SVG versus SVG to STL
STL to SVG creates a two-dimensional section drawing from a 3D triangular mesh. SVG to STL works in the opposite direction by extruding supported flat vector shapes into a 3D mesh. If you need to turn a supported SVG outline into an STL model, try our SVG to STL Converter.